Functions decription:
1. ultra-high-speed CPU is used as the core of the discharge circuit, and the discharge gap is
sampled 20 million times per second, which ean make the best adjustments to the discharge intime
to make the discharge morestable
2. 'Ille hardware detection loop can be turned on, and the hardware will automatically complete the
servo tracking, which is more effective in small area deep holeprocessing.
3. 'Ille main CPU adopts industrial-grade low-power CPU, which can work stably even without a
4. Provide 10,000 sets Of file storage, which can store 10,000 different mold proeessingeonditions.
Multi-group machining coordinate memoryfunction.
5. Humanized operation, 3D interface display, different display information categories are placed on
different pages, you can turn pages and operate at anytime.
6. With 10 segments Of automatic fine-tuning function. You ean: (l) Self-editing: Edit the
processing conditions according to personal experience; (2) AUTOZ automatic editing: Given the
maximum depth initial current and the finished thickness selection, the processing conditions will
be automatically adjusted Editing is complete; (3) Intelligent condition editing: As long as you
select the electrode shape, electrode and workpieee material, electrode cross-sectional area, and the
thickness and depth setting after processing, the processing conditions will be automatically edited.
The above three editing methods are all It can be processed by onetime.
7. Modify system parameters, XY.Z axis coordinates can be switched between metric system and
inch system.
8. Discharge conditions are automatically adjusted. When the discharge is unstable, the computer
will automatically modify the discharge efficiency and working time, and the disehargeeonditions
will automatically recover after stabilization. The processing conditions can be modified and
adjusted at any time duringproeessing.
9. Automatic anti-earbon deposition detection function. When the carbon deposition processis
unstable, the computer automatically adjusts the processing parameters and increases the slag
discharge height, and automatically restores when it isstable.
10. It can be set to discharge 2—10 times to pull up to any set position and then continueproeessing,
which has a good slag removal effect for deep hole processing.
11. It has the function of eliminating secondary discharge and fast pulling up of carbon deposit or
fast pulling up function of discharge edgeseeking.
12. With energy control function, the processing effect can be more uniform. The energy controlcan
be turned off to make graphite processingfaster.
1.3. The newly designed power box conforms to the European CE safety standards, which can be
dustproof, waterproof, anti-interference, and improve the life of the electronicboard.
14. Adopt industrial-grade PC-BASE controller and adopt DOM new memory to replace traditional
hard disk, which can read files faster and more stable and more suitable for industrialuse.
15. With upward discharge machining function. special workpiece processingeasier.
16. It has two independent machining coordinate systems. The male and female molds canbe
divided or processed in different coordinatesystems.
17. After power off, restart the system and automatically load the last processing conditions and
processing coordinates. You can directly press the wire control box to discharge withoutpressing
any buttons on thepanel.
18. lhe pulling speed is divided into sections to increase the servo speed while ensuring that the
electrode is not deformed, and improve the efficiency of large-areaprocessing.
19. Coordinates and processing data are stored separately, and the same processing conditionscan
be quickly added in different coordinateprocessing.


Specifications:
1. X,Y,Z travel mm
2. Worktable size: 1700* 1000mm
3. Precision: SO .0 Imm
4. Optimal processing surface roughness:S0.6 gm
5. Spindle head stroke:300 mm
6. Electrode plate to table distance:260-860mm
7. Water tank capacity:900L
8. Maximum working current:60A
9. Processing speed:400mmA3/min
10. Max. load: 2200kg
11. Voltage:3 phase50.Hz,380V
12. Power:4KW
13. mm
14. Weight:4000 kg